What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
09.06.2025 15:59
It also is a device that limits the change in current flow.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
what exactly is a ‘surge’ protector?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
First Sentence:
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Apple Is About to Upgrade Your Current AirPods with Some Neat New Abilities - Gear Patrol
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
He then asserts :
We've finally slowed the surge in overdose deaths. The Trump admin may undo all of it - Salon.com
but this device (an Inductor) … impedes the rapid changes in the current.
2024–10–10[John johnson John Johnson ]
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Cal Raleigh’s heroics can’t save Mariners as Orioles complete sweep - The Seattle Times
He then describes Rainy Season and Lightning.
but I think this circuit , shows a few more pieces.
Now when you have a certain ac resistance, then a current flows in a loop.
'Cheers' star's cause of death released - KSDK
A fuse is a non-resetable over current circuit protector.
This is 'the assistant's answer'
The bolt then partially travels down the line to your home.
iFixit is retroactively giving the Nintendo Switch a 4/10 on repairability - The Verge
But it can get overloaded, and no longer works.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
With Micah Parsons, the Cowboys foolishly drag their feet — again - NBC Sports
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This one hit behind the barn.
There are three different concepts here that are getting confused.
Trump’s budget puts Huntsville-made spacecraft on the chopping block - AL.com
So, the voltage could go up to 500 volts, and the fuse will not open up.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
There are two important concepts here.
Stock Market News, June 3, 2025: Nasdaq Moves Higher; OECD Cuts U.S. Growth Outlook - WSJ
the problem then depends on "how fast does the fuse operate?".
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Blood test detects multiple cancer types through cell-free DNA - Medical Xpress
An AC voltage/ current source, and an ac inductive load.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–10–14 [Omar Gharbi Omar Gharbi ]
David Beckham scores a winner with the royal circle - BBC
A circuit breaker is similar, but is resettable.
At least they know the answer if they wanted it.
In schematic diagrams this is the symbol for a fuse:
Milky Way has 50-50 chance of colliding with neighbor galaxy - NewsNation
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
The third is lightning and “how it gets conducted into a home.”
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
One is “what exactly is in a ‘surge protector’ ? ”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
The ‘golden summer of cheap flights’: Now’s the time for last-minute deals - CNN
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Upvotes:
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
DOOM: The Dark Ages | Update 1 Release Notes - Slayers Club
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Edit 2024–10.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
This is where this question deviates from being a 'generic' question, and becomes more specific.
[image of Common-mode choke]
The MOV will conduct when the voltage exceeds 50% of line voltage.
so, what happens?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Because the load is inductive, the current lags the voltage.(by a bit).
At one ohm, the resistor has a maximum of 1 watt power.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–16 [ OO OLAOYE OYEBODE ]
But… the neutral is now “floating” because of the 1 ohm resistance.
I post the exact comment here.
One
This is where the MOV conducts again, and dissipated the energy.
What is lightning?
a photo is worth a thousand words.
For this case there are devices called Metal oxide varistors (MOV).
He then describes the function of a fuse.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Here is a simplified AC power diagram.
eight
Can the fuse protect the electronic devices from lightning instead of a surge protector.
The other is “what does a “fuse” do?”
What does a fuse do?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Barnstars:
nine
These devices are installed between the “hot” and “neutral” and protective ground.
(Dc diagram shown, AC is similar).
These are simplified answers to the original question, and does not change anything I wrote above.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This device then solves the entire problem.
It seems Mohan does not understand the difference between a comment and an Answer.
[old diagram got deleted by accident]